Air and Gas Drilling Manual by William C. Lyons

| abril 16, 2012 | 0 Comentarios
Air and Gas Drilling Manual William Lyons
DESCRIPCIÓN DEL TEXTO
This third edition of the Air and Gas Drilling Manual is written as a practical reference for engineers and earth scientists who are engaged in planning and carrying out deep air and gas drilling operations. The book covers air (or gas) drilling fluids, aerated (gasified) drilling fluids, and foam driling. Further, from the mechanical rock destruction standpoint, the book covers conventional rotary drilling, downhole positive displacement motor (PDM) drilling, and down-the-hole hammer (DHT) drilling.
This new third edition is unique in that we have presented the entire engineering material in both the USCS and SI unit systems, including the important equations used for air (or gas) drilling and aerated (gasified) drilling, along with the foam drilling calculations. Solutions based on these equations are given in MathCad, using both USCS and SI units, providing readers with complete transparency into the solutions process for these complicated fluid flow problems. These MathCad solutions are presented in the appendices.

TABLA DE CONTENIDO

Preface

Chapter 1. Introduction and Units

Chapter 2. Air and Gas Versus Mud

Chapter 3. Surface Equipment

Chapter 4. Downhole Equipment

Chapter 5. Compressors and Nitrogen Generators

Chapter 6. Direct Circulation Models

Chapter 7. Reserve Circulation Models

Chapter 8. Air, Gas and Unstable foam Drilling

Chapter 9. Aerated Fluids Drilling

Chapter 10. Stable Foam Drilling

Chapter 11. Specialized Downhole Drilling Equipment

Chapter 12. Underbalanced Drilling

Appendix A. Dimensions and units, conversion factors

Appendix B. Average annual atmospheric conditions

Appendix C. Chapter 8 Illustrative Example MathCad Solutions

Appendix D. Chapter 9 Illustrative Example MathCad Solutions

Appendix E. Chapter 10 Illustrative Example MathCad Solutions

Appendix F. Chapter 11 Illustrative Example MathCad Solutions

Appendix G. Direct Circulation Minimum Volumetric Flow Rates

CARACTERÍSTICAS DE LA DESCARGA
Título: Air and Gas Drilling Manual (Air and Gas Drilling Field Guide)
Autor: William C. Lyons, Boyun Guo, Reuben L. Graham and Greg D. Hawley
Idioma: Inglés
Edición: Tercera – 3ra (Third Edition)
Año de Publicación: 2009
Número de Páginas: 776
Formato: .pdf
Peso del Archivo: 7.6 Mb
Compresor de Archivos: .RAR
OPCIONES PARA DESCARGAR EL LIBRO GRATIS

Tags: ,

Categoría: Ingeniería de Petróleos

Sobre el autor (Perfil del autor)

Comentarios (0)

Trackback URL | Comentarios Feed RSS

No hay comentarios aún. ¡Sé el primero en comentar!

Deja un Comentario